Aluminium fence posts
Aluminium fence posts cost €29 at 0.95 m, €40 at 1.39 m, €49 to €61 at 1.83 to 1.86 m and €48 to €101 at 2.4 m, with VAT. They are slotted to take panels or boards, and are either concreted into the ground or bolted to a base plate.
Lengths, slots and caps, setting posts in the ground or on a base, and what each costs.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- €49 to €61a post 1.83 to 1.86 m long
- €48 to €101a 2.4 m post
- 70 mmsquare, in the shop system
- €18 to €24a bolt-down base

Post lengths and what each is for
A 2.4 m post under a 1.8 m fence leaves 0.6 m to go into the ground. The 1.83 m post is the same height as the fence, so it stands on a base plate or a wall. A 1.83 m post weighs 3.5 kg and a 2.4 m post 4.6 kg. Posts can be cut down on site to get the height right.
Price your aluminium fence
Three taps and the price of the fence shows as you go. Your name and number come last, and only if you want a contractor to price the job.
Composite boards in aluminium posts, 1.8 m high, 10 to 20 m, supplied and fitted: €1,390 to €3,900.
How the price is worked out
The figure is what Irish shops charge for the panels of one bay and one post, a metre with VAT, times the length you pick. It covers plain, slatted and patterned panels, so it is a range. A post to close the run, caps, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Louvre screens and made-to-measure fences are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after seeing the garden.
Slots, strips and caps
A shop post has slots on three sides. In a straight run two of them are used and the third is covered with a removable aluminium strip. At a corner the side slot comes into use, so the same post does line, corner and end. One 2.4 m post sold for composite boards is routed on all four sides, which lets a second fence branch off at a right angle.
A cap for the top comes with the post in some ranges and is a separate line in others. Check which.
In the ground, or on a base
Concreted in
- Where
- Soil, lawn, a border
- Post
- Longer than the fence: 2.4 m for 1.8 m
- Extra part
- Concrete for each hole
- When wind is strong
- The seller's advice for the shop system
Bolted down
- Where
- Concrete, paving, a deck or a wall top
- Post
- The height of the fence: 1.83 m
- Extra part
- A base plate, €18 to €24
- When wind is strong
- The seller points to a post in the ground instead
The shop system's own safety note says its posts are not designed to resist strong winds, and recommends a 2.4 m post installed directly into the ground where wind is strong. A ground spike with bolts is also sold, at €23.95.
Aluminium posts for composite boards
Aluminium posts are sold on their own for composite fencing, at 1.86 m and 2.44 m, in grey, charcoal or brown. They cost €49 to €61 at the shorter length. Another range lists its post at €92 in plain aluminium and €103 in black. A boxed section of boards comes with one post, and the last section needs one more. Aluminium, composite or timber.
More of the fence
Fence panelsQuarter, half and full-height aluminium panels. A 1.8 m bay costs €449 to €689.
Slat fencingHorizontal slats with a gap you choose, from 80 mm to 200 mm deep.
Privacy screensA short, tall run beside a patio, a bin store or an overlooked corner.
Gates to matchA side gate in the same finish as the fence, €354 to €466.
Black and grey: powder coatDark grey, taupe, black or any colour by its RAL number.Questions before you order
How much is an aluminium fence post?
Aluminium fence posts cost €29 at 0.95 m, €40 at 1.39 m, €49 to €61 at 1.83 to 1.86 m and €48 to €101 at 2.4 m, with VAT. They are slotted to take panels or boards, and are either concreted into the ground or bolted to a base plate.
How are aluminium fence posts fixed?
Concreted into the ground, or bolted to a base plate on concrete, paving, a deck or a wall.
How long should the post be for a 1.8 m fence?
2.4 m if it is set in the ground, which leaves 0.6 m below the surface. 1.83 m if it stands on a base plate.
Can aluminium posts be cut?
Yes. The shop system's posts can be cut to get the height right.
Do I need an extra post?
Yes. Each bay brings one post, so a run needs one more to close it.
Everything on this site
The fence and its parts
Cost and the work

See the price of the fence before anyone rings
Pick the kind of fence, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
