Aluminium fencing installation
An aluminium fence goes up posts first. Each post is concreted into the ground or bolted to a base plate, the panels or slats are then slid or fixed between the posts, and the caps, trim and gate go on last. The fitting is priced on a site visit, because the ground and the line decide the work.
The work in order, how posts are fixed on soil, slab and wall, and what a site visit settles.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- posts firstthen panels, caps and gate
- 1.79 mbetween posts, for shop panels
- 2.4 mthe post to set in the ground
- on a site visitwhere fitting is priced

The work, in order
- Set out. The line is marked, the gate bay is placed, and every post position is measured off at the panel width.
- Posts. Each one is concreted into a dug hole, or bolted to a base plate on concrete, paving or a wall, and checked for line and plumb.
- Infill. Shop panels slide down the slots in the posts, one on top of the next. Made-to-measure sections are fixed between the posts.
- Finishing. Unused slots are covered with their strips, caps go on the posts and trim on the panel edges.
- The gate. It is hung on its posts and the lock is fitted and tried.
Ground, slab or wall
Soil or lawn
- How the post is fixed
- Concreted into the ground
- What it needs
- A post longer than the fence, 2.4 m for 1.8 m
Concrete or paving
- How the post is fixed
- Bolted down
- What it needs
- A base plate for each post, €18 to €24
A low wall
- How the post is fixed
- Started on the wall
- What it needs
- A wall starting base, and a wall fit to take it
A deck
- How the post is fixed
- Bolted down
- What it needs
- A base plate, and framing under it to fix into
The seller of the shop system says its posts are not for structural use, should not go on an unstable or irregular surface, and should be 2.4 m posts set directly in the ground where the wind is strong.
Price your aluminium fence
Three taps and the price of the fence shows as you go. Your name and number come last, and only if you want a contractor to price the job.
Aluminium panel fence, 1.8 m high, 10 to 20 m, supplied and fitted: €2,510 to €7,700.
How the price is worked out
The figure is what Irish shops charge for the panels of one bay and one post, a metre with VAT, times the length you pick. It covers plain, slatted and patterned panels, so it is a range. A post to close the run, caps, gates, delivery and the fitting come on top, and the fitting is priced on a site visit. Louvre screens and made-to-measure fences are priced to the site. Use it to plan with. It isn't a quote: a contractor prices yours after seeing the garden.
What a site visit settles
- The line. Where the boundary is, and what is on it now.
- The old fence. Who takes it down and where it goes.
- Levels. Whether the run is level, stepped or on a slope.
- Fixing. Which posts go in the ground and which on bases.
- The ends. How the last bay is made up where the run does not land on a full panel.
- Access. How 1.79 m panels and 2.4 m posts reach the back garden.
None of these shows up in a price per metre, which is why the fitting is priced after someone has stood in the garden.
Fitting it yourself
The shop system is sold as easy to assemble, and its posts can be cut to height. If you fit it yourself you are buying supply only, at 23% VAT. Count a post for every bay and one to close the run, bases where the posts stand on concrete, and trim. A 10 m run at 1.8 m high is €2,510 to €3,850 in panels and posts. Aluminium fence posts.
More of the fence
Fence panelsQuarter, half and full-height aluminium panels. A 1.8 m bay costs €449 to €689.
Slat fencingHorizontal slats with a gap you choose, from 80 mm to 200 mm deep.
Fence postsSlotted aluminium posts from €29, set in concrete or bolted down.
Privacy screensA short, tall run beside a patio, a bin store or an overlooked corner.
Gates to matchA side gate in the same finish as the fence, €354 to €466.
Black and grey: powder coatDark grey, taupe, black or any colour by its RAL number.Questions before you order
How is aluminium fencing installed?
An aluminium fence goes up posts first. Each post is concreted into the ground or bolted to a base plate, the panels or slats are then slid or fixed between the posts, and the caps, trim and gate go on last. The fitting is priced on a site visit, because the ground and the line decide the work.
Do aluminium posts need concrete?
In soil, yes: the post is concreted into the ground. On concrete, paving, a deck or a wall it is bolted to a base instead.
How far apart are the posts?
One panel apart for shop panels, which are 1.79 m wide. A made-to-measure fence is built to the spacing agreed with the maker.
Can I install aluminium fencing myself?
The shop system is sold as easy to assemble, and its posts can be cut to height. If you do, you are buying supply only.
How much does fitting cost?
It is priced on a site visit. No fixed figure per metre holds across different gardens.
Everything on this site
The fence and its parts
Cost and the work

See the price of the fence before anyone rings
Pick the kind of fence, the length and the job. When you want a firm price, it goes to a single fencing contractor in your county.
